Fisher butterfly 8510

 

Fisher® 8510 is a flangeless valve, with a splined shaft for throttling control. The 8510 is available in NPS 14 through 24, CL150 (PN 10 and PN 16 compatible). These valves feature an eccentrically mounted disk and a PTFE or 316 stainless steel seal ring.

(a) Valve body sizes ANSI: NPS 14", 16", 18", 20", 24" inch
     Valve body sizes DIN: DN350, DN400, DN500, DN600 mm
(b) Pressure Classes ANSI: CL150
     Pressure Classes DIN: PN10, PN16 bar
(c) Sour Service Capability—Materials are available for applications involving sour service. These materials comply with the requirements of NACE MR0175-2002.
(d) Excellent Flow Control—The eccentrically mounted disc design provides an approximately linear flow characteristic and can be used for on/off or throttling control applications through 90 degrees of disc rotation. Optional disc stop on Type 8510B provides seal protection.
(e) Improved Environmental Capabilities—The optional ENVIRO-SEAL™ packing systems, are designed with very smooth stem surfaces, and live loading provides improved sealing, guiding, and loading force transmission. The seal of the ENVIRO-SEAL system can control emissions to below the EPA (Environmental Protection Agency) limit of 100 ppm (parts per million) for valves.
(f) Lost Motion Minimized—For Type 8510, the taper pin/disc connection and the splined valve shaft with clamped lever and single pivot linkage reduce lost motion between the actuator and valve. (g) For Type 8510B, the taper key/disc connection and the splined valve shaft with clamped lever and single pivot linkage reduce lost motion between the actuator and valve.
(h) Greater Capacities and Lower Operating Torques—The contoured disc increases flow capacity and reduces operating torque at peak angles of disc opening.

 

Contacts

Magnus Dahlén
+4654579226
Joachim Nyqvist
+4654579217
Joakim Karlsson
+4654579216
Jukka Haikala
+358207416202
Kim Larsen
+4570701275
Erik Rune
+4654579231
Anna Oldmark
+4654579240

Documents