KTM Model V­Port Control Ball Valves

KTM Model V­Port Control Ball Valves

KTM™ Model V­Port is a rugged, long-life V-port control ball valve with excellent flow characteristics for various fluids including slurries and fibers.

KTM

Any questions?

Anders Praem
Inside Sales Engineer
Phone. 2137 7759

Anders.Praem@askalon.dk

Frank Kirk Hansen
Area Account Manager West
Phone. 4053 6511

Frank.Kirk@askalon.dk

Kenn Gerwien
Area Account Manager East
Phone. 2346 5513

Kenn.Gerwien@askalon.dk

Critical Service Corrosive, General Service
Flow Characteristics Equal percentage
Material 316 Stainless Steel, 304 Stainless Steel, Stainless Steel
Operating Temperature High Temperature, High Temperature (>250F)
Pressure Class ASME
Shutoff Class Class II (FCI 70-2), Class IV (FCI 70-2)
Valve Size NPS 1 / DN 25, NPS 1-1/2 / DN 40, NPS 12 / DN 300, NPS 14 / DN 350, NPS 16 / DN 400, NPS 18 / DN 450, NPS 2 / DN 50, NPS 3 / DN 80, NPS 4 / DN 100, NPS 6 / DN 150, NPS 8 / DN 200, NPS 20 / DN 500
Valve Size Standard NPS, DN
Valve Type Trunnion Ball Valve, Ball Valve, Ball, Automated Ball Valve
Certifications PED, Lloyd's Register, CE
End Connection Flanged
  • Rotary-valve design provides shearing action between the V-notch ball and the seat, promoting a smooth, non-clogging operation.
  • Straight-through flow design provides high capacity for fluids.
  • With a single-seat design, torque is lower than typical trunnion design valves, for ease of operation and reduced actuator cost.
  • Two seat designs:<ul><li>Laminated seat provides ASME/FCI 70-2 class IV shut-off and withstands tough operating conditions.</li><li>Thick (solid) seat for high-velocity and abrasive or erosive service.</li></ul>
  • Segmented, V-notched ball features high rangeability and smooth throttling action.
  • Choice of full and reduced port, providing the right flow capacity for every application at low cost.
  • Machined ISO 5211 top mounting flange (VA series only).
  • Heavy-duty, stainless steel shaft for high strength and rigidity.
  • Multiple, adjustable ring packing allows easy adjustment without valve disassembly or actuator removal.
  • Shaft bearings assure a durability, smooth and easy valve operation.
  • Positive alignment of split body.
  • The spline connection minimizes the backlash of shaft and disk. It results excellent control performance.

Questions about the product?

Fill out the form below and we vill contact you with answers to your qusestions