VAG EKN M300 epoxy - water

VAG EKN M300 epoxy - water

VAG EKN® M300 is a double-offset flanged butterfly valve (resilient-seated) with epoxy coating, available with long or short face-to-face length or made of welded steel for use in water applications. Long service life, as the medium does not come into contact with the bearing, and due to the wear-resistant, corrosion- and infiltration-proof seat with weld overlay. Suitable for use in water distribution, water treatment, in pretreated waste water, dams, in power plants, industry and in pressure management.

PN: 6/10/16/25/40 - DN: 100...4000

Technical datasheet
Operation and maintenance instructions VAG EKN® H, M and B-series
Operation and maintenance instructions
Drawings DN150-1200_DXF
Drawings DN1300-3000_DXF
Spare part list DN150...300
Spare part list DN350...450
Spare part list DN500...600
Spare part list DN700...800
Spare part list DN900
Spare part list DN1000

Any questions?

Frank Kirk Hansen
Area Account Manager West
Phone. 4053 6511

Kenn Gerwien
Area Account Manager East
Phone. 2346 5513

  • Sealing system/standard: Resilient seated in accordance with EN 593
  • Face-to-face length: acc. to EN 558, basic series 14 (DIN 3202, F4)
  • With flange ends on both sides acc. to EN 1092-2
  • Double-offset disk bearing mounted in maintenance-free bushing
  • Medium free bearing (dry shaft) in body by means of double O-ring sealing and closed disk eyes
  • Wear-resistant, corrosion-resistant and undermining-resistant seat
  • Possible to replace profile sealing ring without disassembling the disk
  • Automatic sealing system with enclosed and pressure-supported profile sealing ring
  • Vacuum tight up to 1 Torr
  • Tight in both flow directions acc. EN 12266
  • With self-locking, fully enclosed, maintenance-free worm gear including mechanical position indicator
  • O-rings: EPDM
  • Body: Ductile iron EN-GJS-400-15 (GGG-40)
  • Valve sealing: EPDM
  • Disk: Ductile iron EN-GJS-400-15 (GGG-40) (exception: DN 100 / DN 125 stainless steel 1.4408)
  • Butterfly valve stem: Stainless steel 1.4021
  • Seat: High-alloy weld overlay, microfinished
  • Body: Internally and externally epoxy coated acc. to GSK guidelines
  • Disk: Epoxy coated according to GSK guidelines (exception: DN 100 / DN 125 stainless steel)

Questions about the product?

Fill out the form below and we vill contact you with answers to your qusestions