Fisher Y696VR Series Vacuum Regulators

Fisher Y696VR Series Vacuum Regulators

Fisher™ Y696VR series vacuum regulators are used where a decrease in vacuum must be limited, such as between a tank and vacuum source to control vacuum in a tank. A decrease in vacuum (increase in absolute pressure) on the diaphragm moves the disk away from the seat, allowing a higher vacuum source to return the system to the setpoint.

Any questions?

Fredrik Andrée
Inside Sales Engineer
Phone. +46 54-57 92 41

Fredrik.Andree@askalon.se

Joachim Nyqvist
Inside Sales Engineer
Phone. +46 54-57 92 17

Joachim.Nyqvist@askalon.se

Frank Kirk Hansen
Area Account Manager West
Phone. +45 4053 6511

Frank.Kirk@askalon.dk

Slawka Pedersen
Inside Sales Manager
Phone. +45 2137 7702

Slawka.Pedersen@askalon.dk

Joonas Jägerroos
Inside Sales Engineer
Mob. +358 40 610 4439

Joonas.Jagerroos@askalon.fi

Body Sizes and End Connection Styles Cast Iron: 1-1/2 or 2 NPT. Steel or Stainless Steel: NPS 1-1/2 or 2 / DN 40 or 50, NPT, SWE, CL150 RF, CL300 RF or PN 16/25/40. Hastelloy C: NPS 1-1/2 or 2 / DN 40 or 50, NPT or CL150 RF
Maximum Control Pressure Full Vacuum
Maximum Downstream Pressure Full Vacuum
Vacuum Control Pressure Ranges 1-inch w.c. to 3 psig / 2 mbar to 0,21 bar in six ranges
Pressure Registration Type Y696VR: Internal
Type Y696VRM: External
Temperature Capabilities NBR: -40° to 180°F / -40° to 82°C
FKM: 40° to 300°F / 4° to 149°C
FFKM: 0° to 300°F / -18° to 149°C
EPDM: -20° to 275°F / -29° to 135°C
VMQ: -40° to 300°F / -40° to 149°C
Approximate Weights Cast Iron: 45 Pounds / 20 kg
Steel, Stainless Steel, or Hastelloy C: 57 Pounds / 26 kg
  • Precision Control of Low-Pressure Settings
  • Corrosion Resistance
  • Installation Adaptability
  • Wide Material Selection
  • High Capacity
  • Feature 6
  • Feature 7
  • Feature 8

Questions about the product?

Fill out the form below and we will contact you with answers to your questions