VAG ZETA with handwheel - wastewater

VAG ZETA with handwheel - wastewater

VAG ZETA® is a resilient-seated knife-gate valve in fully flanged design, sealing in both flow directions, with integrated scraper system and free flow passage. Operation via handwheel. The enlarged bottom seal and the metallic limit stop of the knife in the body ensure perfect tightness. Suitable for use as shut-off valve in waste-water applications, in dams, in power plants and in industry.

PN: 10 - DN: 700...1400

Technical datasheet
Operating and maintenance instructions
Drawings ZETA®_DN_500-1000_DWG
Drawings ZETA®_DN_600-1000_DXF
Drawings ZETA®_HR_DN_1200-1400_DWG

Any questions?

Fredrik Andrée
Inside Sales Engineer
Phone. +46 54-57 92 41

Fredrik Ekeroth (Parental leave)
Inside Sales Engineer
Phone. +46 54-57 92 06

Fredrik Malmström
Inside Sales Engineer
Phone. +46 40-33 02 33

Frank Kirk Hansen
Area Account Manager West
Phone. +45 4053 6511

Kenn Gerwien
Area Account Manager East
Phone. +45 2346 5513

  • Full-flange design, both as wafer type and for pipeline end installation, without additional counter flange at full differential pressure
  • Full-flange design with unrestricted flow passage
  • Leakproof from both flow directions
  • Specially shaped horizontal sealing with double quad ring profile and integrated PTFE sliding rails for reducing operation forces
  • Horizontal and axial guiding of the knife on flexible plastic sliding rails
  • Horizontal sealing adjustable during operation and replaceable with the valve installed in the pipeline
  • Scraper installed on both sides of the plate to clean the knife
  • Handwheel version with AUMA bevel gearbox GK (type A for rising stem)
  • With flange end acc. to EN 1092-2, PN 10
  • Face-to-face length: acc. to EN 558, basic series 20 (DIN 3202 / K1)
  • Body parts, bearing plate and gland: Cast iron EN-GJL-250 (GG-25)
  • Knife: Stainless steel A2
  • U-sealing and horizontal sealing: Elastomer (NBR)
  • All connecting parts: stainless steel A2 (DIN EN ISO 3506)
  • Yoke and sheet metal covering: Stainless steel A2
  • Operating kit: With handwheel
  • Stem: Stainless steel 1.4021

Cast iron parts: Epoxy coated

Questions about the product?

Fill out the form below and we vill contact you with answers to your qusestions