KTM Model VPort Control Ball Valves
KTM™ model VPort is a rugged, long-life V-port control ball valve with excellent flow characteristics for various fluids including slurries and fibers.
Any questions?
Joonas Jägerroos
Inside Sales Engineer
Mob. 040 610 4439
Tommi Penttilä
Sales Manager Isolation Valves
Phone. 0207 416 208
| Critical Service | Corrosive, General Service |
| Flow Characteristics | Equal percentage |
| Material | 316 Stainless Steel, 304 Stainless Steel, Stainless Steel |
| Operating Temperature | High Temperature, High Temperature (>250F) |
| Pressure Class | ASME |
| Shutoff Class | Class II (FCI 70-2), Class IV (FCI 70-2) |
| Valve Size | NPS 1 / DN 25, NPS 1-1/2 / DN 40, NPS 12 / DN 300, NPS 14 / DN 350, NPS 16 / DN 400, NPS 18 / DN 450, NPS 2 / DN 50, NPS 3 / DN 80, NPS 4 / DN 100, NPS 6 / DN 150, NPS 8 / DN 200, NPS 20 / DN 500 |
| Valve Size Standard | NPS, DN |
| Valve Type | Trunnion Ball Valve, Ball Valve, Ball, Automated Ball Valve |
| Certifications | PED, Lloyd's Register, CE |
| End Connection | Flanged |
- Rotary-valve design provides shearing action between the V-notch ball and the seat, promoting a smooth, non-clogging operation.
- Straight-through flow design provides high capacity for fluids.
- With a single-seat design, torque is lower than typical trunnion design valves, for ease of operation and reduced actuator cost.
- Two seat designs:<ul><li>Laminated seat provides ASME/FCI 70-2 class IV shut-off and withstands tough operating conditions.</li><li>Thick (solid) seat for high-velocity and abrasive or erosive service.</li></ul>
- Segmented, V-notched ball features high rangeability and smooth throttling action.
- Choice of full and reduced port, providing the right flow capacity for every application at low cost.
- Machined ISO 5211 top mounting flange (VA series only).
- Heavy-duty, stainless steel shaft for high strength and rigidity.
- Multiple, adjustable ring packing allows easy adjustment without valve disassembly or actuator removal.
- Shaft bearings assure a durability, smooth and easy valve operation.
- Positive alignment of split body.
- The spline connection minimizes the backlash of shaft and disk. It results excellent control performance.
Käy osoitteessa
Askalon AB, filial i Finland, Hakamäenkuja 5, FIN-01510 Vantaa, Finland
Phone. 020 741 6200, Email: sales@askalon.fi
© 2021 Askalon AB, filial i Finland