Baumann 24003

Baumann™ 24003 trevägsventil är idealisk för styrning av flöde och temperatur där blandning eller avledning krävs. Denna ventil använder en robust gjuten brons- eller CF8M rostfritt stålkropp med S31600 austenitisk rostfritt stålform för längre livslängd.

Baumann

Har du några frågor?

Erik Rune
Solution Seller
Tel. 054-57 92 31

Erik.Rune@askalon.se

Martin Pettersson
Solution Seller
Tel. 054-57 92 40

Martin.Pettersson@askalon.se

Niklas Pettersson
Account Manager
Tel. 054-57 92 09

Niklas.Pettersson@askalon.se

Rickard Andersson
Account Manager
Tel. 040-33 02 34

Rickard.Andersson@askalon.se

Specifikationer
Funktioner
Produktförfrågan

Certifications	PED, CUTR, ATEX, CRN
Critical Service	General Service, Mixing
Flow Characteristics	Linear
Material	Bronze, Stainless
Operating Temperature	Standard Temperature
Pressure Class	Bronze: 400 psi at 150°F/250 psi at 400°F; Stainless: 720 psi at 150°F/515 psi at 400°F
Process Connection Type	Threaded, Welded-on Flanges
Shutoff Class	Class III (FCI 70-2)
Valve Size	NPS 1/2, NPS 1, NPS 1-1/2, NPS 2
Valve Size Standard	NPS

Optional ENVIRO-SEAL™ packing system can be used to meet critical emission control requirements; suitable for use in light duty chemical service.
High quality type 316 austenitic stainless steel trim materials are available.
Superior dual plug and stem guiding provides increased stability during plug travel.
Multiple trim capacity reductions available to meet changing process requirements.
Epoxy powder coated actuator with stainless steel fasteners for corrosion resistance.
Multi-spring, field reversible actuator with reduced deadband, permits direct operation from remote signal devices.
Entire actuator and yoke can be removed from the valve assembly while maintaining packing integrity.
Fisher FIELDVUE™ digital valve controllers are available for remote calibration and diagnostics in facilities utilizing the PlantWeb architecture.

Varumärken

Baumann 24003

Frågor på produkten?