Hem/Produkter/Fasani Style B Kilslidsventil för höga tryck

Fasani Style B Kilslidsventil för höga tryck

Har du några frågor?

Bernhard Witzelsteiner
Account Manager
Mob. 070 378 83 35

Fredrik Andrée
Process Engineer, Engineering dept.
Tel. 054-57 92 41

Fredrik Ekeroth
Solution Seller
Tel. 054-57 92 06

Fredrik Malmström
Solution Seller
Tel. 040-33 02 33

Ett brett sortiment av kilslidsventiler speciellt utformade för högtrycks- och högtemperaturapplikationer.

Fasani KRAFT & VÄRME

Certifications	NACE, ASME B31.1, India Boiler Registration, PED
End Connection	Flanged, Butt Weld
Application	High Temp, HRSG, Pumps, Valves & Manifolds, Steam turbine, General Service, Cogeneration, Balance of Plant, Biomass Boiler and Power Boiler
Body Design	Long Pattern
Material	Alloy, Carbon Steel, Duplex, Stainless Steel, Steel
Operating Temperature	Greater Than 400 F (204 C), High Temperature
Pressure Class	ASME
Process Connection Type	1500RF, 2500RF, 900RF, BWE
Seat/Seal Type	Metal-to-Metal, Wedge
Shutoff Class	Class V (FCI 70-2)
Standards	ASME B16.34
Valve Size	5 inch, 6 inch (DN150) and Larger, NPS 2 / DN 50, NPS 3 / DN 80, NPS 4 / DN 100, NPS 6 / DN 150
Valve Size Standard	NPS
Valve Type	Gate
Media	Hot Water, Liquid, Liquids, Oxygen, Steam, Water

A range of compact pressure seal gate valves designed according to ASME B16.34 and wall thickness according to API 600.
All range is offered in all the material stated in the ASTM specifications (NACE compliance included), and designed to always guarantee the maximum safety and flow efficiency.
End to end dimensions as per ASME B16.10 (Long pattern for flanged valves, short pattern for Butt welded ends).
Seats are welded in.
Position indicator is offered as standard.
Stellite® gr. 6 overlay on seat and wedge; Stellite® gr. 21 overlay on backseat.
Pressure seal gasket has trapezoidal shape for a low load on bolting, and is supplied in integral metal type.
Standard ISO top mounting for easy assembly of any type of actuator or bevel gear.
Available options: wedge vent hole or overpressure pipe, by-pass, limit switch in open or closed position.
Valves are offered as standard with manual operators (Hand wheel or bevel gear depending on size). Actuated options such as electric, pneumatic or hydraulic are available.