KTM modell V­Port kulventil

KTM modell V­Port kulventil

KTM™ modell V­Port är en robust, långlivad V-port kulventil med reglerfunktion. Den har utmärkta flödesegenskaper för olika vätskor inklusive slurry och fibrer.

KTM

Har du några frågor?

Bernhard Witzelsteiner
Account Manager
Tel. 070 378 83 35

Bernhard.Witzelsteiner@askalon.se

Fredrik Ekeroth
Solution Seller
Tel. 054-57 92 06

Fredrik.Ekeroth@askalon.se

Fredrik Malmström
Solution Seller
Tel. 040-33 02 33

Fredrik.Malmstrom@askalon.se

Johan Riedenlow
Account Manager
Tel. 040-33 02 30

Johan.Riedenlow@askalon.se

Critical Service Corrosive, General Service
Flow Characteristics Equal percentage
Material 316 Stainless Steel, 304 Stainless Steel, Stainless Steel
Operating Temperature High Temperature, High Temperature (>250F)
Pressure Class ASME
Shutoff Class Class II (FCI 70-2), Class IV (FCI 70-2)
Valve Size NPS 1 / DN 25, NPS 1-1/2 / DN 40, NPS 12 / DN 300, NPS 14 / DN 350, NPS 16 / DN 400, NPS 18 / DN 450, NPS 2 / DN 50, NPS 3 / DN 80, NPS 4 / DN 100, NPS 6 / DN 150, NPS 8 / DN 200, NPS 20 / DN 500
Valve Size Standard NPS, DN
Valve Type Trunnion Ball Valve, Ball Valve, Ball, Automated Ball Valve
Certifications PED, Lloyd's Register, CE
End Connection Flanged
  • Rotary-valve design provides shearing action between the V-notch ball and the seat, promoting a smooth, non-clogging operation.
  • Straight-through flow design provides high capacity for fluids.
  • With a single-seat design, torque is lower than typical trunnion design valves, for ease of operation and reduced actuator cost.
  • Two seat designs:<ul><li>Laminated seat provides ASME/FCI 70-2 class IV shut-off and withstands tough operating conditions.</li><li>Thick (solid) seat for high-velocity and abrasive or erosive service.</li></ul>
  • Segmented, V-notched ball features high rangeability and smooth throttling action.
  • Choice of full and reduced port, providing the right flow capacity for every application at low cost.
  • Machined ISO 5211 top mounting flange (VA series only).
  • Heavy-duty, stainless steel shaft for high strength and rigidity.
  • Multiple, adjustable ring packing allows easy adjustment without valve disassembly or actuator removal.
  • Shaft bearings assure a durability, smooth and easy valve operation.
  • Positive alignment of split body.
  • The spline connection minimizes the backlash of shaft and disk. It results excellent control performance.

Frågor på produkten?

Fyll i formuläret nedan så kontaktar vi dig och svarar på dina frågor