KTM modell V­Port kulventil

KTM modell V­Port kulventil

KTM™ modell V­Port är en robust, långlivad V-port kulventil med reglerfunktion. Den har utmärkta flödesegenskaper för olika vätskor inklusive slurry och fibrer.

Har du några frågor?

Bernhard Witzelsteiner
Account Manager
Mob. 070 378 83 35


Fredrik Ekeroth
Solution Seller
Tel. 054-57 92 06


Fredrik Malmström
Solution Seller
Tel. 040-33 02 33


Johan Riedenlow
Account Manager
Tel. 040-33 02 30


Critical Service Corrosive, General Service
Flow Characteristics Equal percentage
Material 316 Stainless Steel, 304 Stainless Steel, Stainless Steel
Operating Temperature High Temperature, High Temperature (>250F)
Pressure Class ASME
Shutoff Class Class II (FCI 70-2), Class IV (FCI 70-2)
Valve Size NPS 1 / DN 25, NPS 1-1/2 / DN 40, NPS 12 / DN 300, NPS 14 / DN 350, NPS 16 / DN 400, NPS 18 / DN 450, NPS 2 / DN 50, NPS 3 / DN 80, NPS 4 / DN 100, NPS 6 / DN 150, NPS 8 / DN 200, NPS 20 / DN 500
Valve Size Standard NPS, DN
Valve Type Trunnion Ball Valve, Ball Valve, Ball, Automated Ball Valve
Certifications PED, Lloyd's Register, CE
End Connection Flanged
  • Rotary-valve design provides shearing action between the V-notch ball and the seat, promoting a smooth, non-clogging operation.
  • Straight-through flow design provides high capacity for fluids.
  • With a single-seat design, torque is lower than typical trunnion design valves, for ease of operation and reduced actuator cost.
  • Two seat designs:<ul><li>Laminated seat provides ASME/FCI 70-2 class IV shut-off and withstands tough operating conditions.</li><li>Thick (solid) seat for high-velocity and abrasive or erosive service.</li></ul>
  • Segmented, V-notched ball features high rangeability and smooth throttling action.
  • Choice of full and reduced port, providing the right flow capacity for every application at low cost.
  • Machined ISO 5211 top mounting flange (VA series only).
  • Heavy-duty, stainless steel shaft for high strength and rigidity.
  • Multiple, adjustable ring packing allows easy adjustment without valve disassembly or actuator removal.
  • Shaft bearings assure a durability, smooth and easy valve operation.
  • Positive alignment of split body.
  • The spline connection minimizes the backlash of shaft and disk. It results excellent control performance.

Frågor på produkten?

Fyll i formuläret nedan så kontaktar vi dig och svarar på dina frågor