Home/Tuotteet/Fisher FIELDVUE DPC2K Digital Process Controller

Fisher FIELDVUE DPC2K Digital Process Controller

Any questions?

Aleksei Seleznev
Inside Sales Engineer
Phone. 040 530 2017

The Fisher™ FIELDVUE™ DPC2K digital process controller is an electro-pneumatic PID controller that can replace pneumatic controllers to meet your single continuous PID loop needs. The DPC2K has been designed to provide application flexibility, through simple configuration and high speed network communications, for your next expansion or modernization project.

FIELDVUE Fisher

Tekniset tiedot
Ominaisuudet

Instrument Power	9 to 28 VDC at 1 Watt nominal
Certifications	CSA & cSAus: Type 4X, IP66 ATEX & IECEx: IP66
Communication Protocol	Ethernet: Modbus TCP, HART-IP (Common commands and Universal commands) Serial: Modbus RTU Baud: Configured 9600 to 256,000 baud Default 115,200
Analog Inputs	(2) 4-20 mA
Analog Output	(1) 4-20 mA
Pressure Sensor Option: Sealed Gauge	2.1, 6.9, 20.7, 41.4, 103 bar (30, 100, 300, 600, 1500 psi) ranges available
Pneumatic Output	Single-Acting Direct
Low Bleed Steady State Air Consumption	At 1.4 bar (20 psig) supply pressure 0.056 normal m3/hr (2.1 scfh), average At 5.5 bar (80 psig) supply pressure 0.184 normal m3/hr (6.9 scfh), average
Supply Pressure	Minimum Recommended: 0.3 bar (5 psig) higher than maximum actuator requirements Maximum: 10.0 bar (145 psig) or maximum pressure rating of the actuator, whichever is lower Medium: Air or Natural Gas Supply medium must be clean, dry and noncorrosive
Connections	Supply Pressure: 1/4 inch NPT internal Output Pressure: 1/4 inch NPT internal Tubing: 3/8 inch recommended Vent: 3/8 inch NPT internal Electrical: 1/2 inch NPT internal, two conduit entries

Put simple control at the valve
Save money and time with integrated packaging, quick configuration, and application flexibility
Install field intelligence to enhance safety, responsiveness, and productivity
Provide process data previously not available with game changing Ethernet connectivity
Transform operations by upgrading technology from pneumatics to electro-pneumatic
Address regulatory and climate issues by leveraging low bleed technologies and adding control to electric actuation

Brands

Fisher FIELDVUE DPC2K Digital Process Controller

Questions about the product?