Home/Tuotteet/Slide Penstock Edition

Slide Penstock Edition

Any questions?

Henna Ketoja
Inside Sales Engineer
Mob. 400 612 124

Marko Virrantuomi
Key Account Manager West
Mob. 040 668 3300

Slide Penstock Edition is usable for installation at inlets and outlets of chambers and basins. Suitable for throttling and regulating purposes. With sealing on 4 faces. For on- and off-seating pressure. Low operation forces.

Dimensions: from WxH 150x150 up to WxH 1200x1200.

IBS Penstocks

Tekniset tiedot
Ominaisuudet

Material frame, plate, bolts, nuts, stem, push rod	M.-No.: 304 / 304L
Material seal	M.-No.: NBR / EPDM
Material slide rails	M.-No.: POM
Material stem nuts	M.-No.: bronze Rg7
Material fixing material	M.-No.: 316Ti / 316L
Other materials like Super Duplex Steel on request

Construction Features:

welded frame out of rugged bended profile
wear-resistant slide rail screw fixed on the frame
profile seal maintenance friendly screw fixed on the frame
universal fixing of all actuation facilities possible
rafted according to DIN 19569-4, BSI BS 7775 and ANSI / AWWA C513-05, AWWA C561-04

Actuation:

on wall – bracket with square cap
with protruding headstock and hand wheel / gearbox / electric actuator / cylinder
with central headstock and hand wheel / gearbox / electric actuator / cylinder

Fixing:

for bolting and sealing by cement mortar
for grouting into recess
straight sill for bolting / grouting
round sill for grouting

Brands

Slide Penstock Edition

Questions about the product?