Fisher easy-e EZ Control Valve

Fisher easy-e EZ Control Valve

Fisher™ easy-e EZ ventiler anvendes til afspærring og regulering af mange forskellige gasser og væsker. Denne enkeltports sæde/kegle ventil har spindel styring, ubalanceret kegle og trim som hurtigt og enkelt kan udskiftes. EZ ventilen anvendes i mange kemiske, kulbrinter eller andre applikationer hvor man behøver en god regulering af ikke smørende, viskøse eller andre svære medier. Metaltætning er standard for alle generelle applikationer med varierande trykfald og temperaturer. Blødtætning (PTFE) findes som tilvalg for applikationer som har højere tætningskrav.

Any questions?

Klaus Bergmann
Area Account Manager East & West
Phone. 2112 3345

Peder Hvidberg
Area Account Manager West
Phone. 2178 5053

Certifications SIL capable, Fugitive Emission, NACE
Critical Service Noise Abatement, Dirty Service, Steam Condition, Erosive, Low Flow, Corrosive, General Service, Outgassing, Flashing
Flow Characteristics Equal percentage, Linear, Special Characterization, Quick Opening
Material Carbon Steel, Stainless, Duplex, Alloy
Operating Temperature Standard Temperature
Pressure Class PN, ASME
Process Connection Type Flanged, Butt Weld, RTJ, Threaded, Socket Weld
Shutoff Class Class IV (FCI 70-2), Class V (FCI 70-2), Class VI (FCI 70-2)
Valve Size NPS 1/2, NPS 3/4, NPS1, NPS 1-1/2, NPS 2, NPS 3, NPS 4
Valve Size Standard NPS, DN
  • Post-guiding provides valve plug stability with less chance of a sticking valve plug due to non-lubricating or sticky process fluids or build-up of entrained solids.
  • A flow-straightening, vaned seat ring is available in full port and first reduction port sizes. It offers excellent open- and closed-loop performance and may be used as a direct replacement for the non-vaned seat ring.
  • Complies with the Clean Air Act with ENVIRO-SEAL™ packing systems.
  • The process fluid flows through the trim, flushing away solid deposits above and below the guide bushing, thus reducing the possibility of a sticking valve plug.
  • Quick-change trim, with a clamped-in seat ring, reduces the disassembly time.
  • Low-flow requirements can be satisfied with standard restricted-capacity trim or with Micro-Form, Micro-Flute, or Micro-Flow valve plugs.
  • Streamlined flow passages provide greater capacities than most globe valves of the same line size.

Questions about the product?

Fill out the form below and we will contact you with answers to your questions