Home/Produkter/Slide Penstock with Slide Rails

Slide Penstock with Slide Rails

Any questions?

Kenn Gerwien
Account Manager
Phone. 2346 5513

Slide Penstock with slide rails is usable for installation at inlets and outlets of chambers and basins suitable for throttling and regulating purposes. With sealing on 4 faces. For on- and off-seating pressure. Low operation forces.

Dimensions: available up to the largest measurements

IBS Penstocks VAND & SPILEVAND

Specifikationer
Funktioner

Material frame, plate, bolts, nuts, stem, push rod	M.-No.: 304 / 304L
Material seal	M.-No.: NBR / EPDM
Material slide rails	M.-No.: POM
Material stem nut	M.-No.: bronze Rg7
Material fixing material	M.-No.: 316Ti / 316
Other materials like Super Duplex Steel on request

Construction Features:

welded frame out of rugged bended profile
wear-resistant slide rail screw fixed on the frame
profile seal maintenance friendly screw fixed on the frame
universal fixing of all actuation facilities possible.
crafted according to DIN 19569-4, BSI BS 7775 and ANSI / AWWA C513-05, AWWA C561-04

Actuation:

on wall – bracket with square cap
with protruding headstock and hand wheel / gearbox / electric actuator / cylinder
with central headstock and hand wheel / gearbox / electric actuator / cylinder

Fixing:

for bolting and sealing by cement mortar
for grouting into recess
straight sill for bolting / grouting
round sill for grouting

Brands

Slide Penstock with Slide Rails

Questions about the product?