Home/Produkter/VAG ZETA-XL with pneumatic actuator - wastewater

VAG ZETA-XL with pneumatic actuator - wastewater

VAG ZETA®-XL is a resilient-seated knife-gate valve in fully flanged design, sealing in both flow directions, with integrated scraper system and free flow passage. Operation via pneumatic actuator. Suitable for use as shut-off valve in waste-water applications, in dams, in power plants and in industry.

DN: 700...1400

Downloads
Technical datasheet
Drawings ZETA®_PA_DN_700-1400_DWG

VAG VAND & SPILEVAND

Any questions?

Frank Kirk Hansen
Area Account Manager West
Phone. 4053 6511

Frank.Kirk@askalon.dk

Kenn Gerwien
Area Account Manager East
Phone. 2346 5513

Kenn.Gerwien@askalon.dk

Characteristics
Material
Anticorrosive
Product request

Face-to-face length: acc. to EN 558, basic series 20 (DIN 3202 / K1)
With flange end acc. to EN 1092-2, PN 10
Full-flange design, both as wafer type and for pipeline end installation, without additional counter flange at full differential pressure
Horizontal and axial guiding of the knife on flexible plastic sliding rails
Full-flange design with unrestricted flow passage
Leakproof from both flow directions
Specially shaped horizontal sealing with double quad ring profile and integrated PTFE sliding rails for reducing operation forces
Scraper installed on both sides of the plate to clean the knife

Operating kit: With pneumatic actuator
Body parts, bearing plate and gland: Cast iron EN-GJL-250 (GG-25)
Knife: Stainless steel A2
U-sealing and horizontal sealing: Elastomer (NBR)
All connecting parts: stainless steel A2 (DIN EN ISO 3506)
Yoke and sheet metal covering: Stainless steel A2

Cast iron parts: Epoxy coated

Brands

VAG ZETA-XL with pneumatic actuator - wastewater

Questions about the product?