Home/Produkter/VAG EKO plus with pneumatic actuator

VAG EKO plus with pneumatic actuator

VAG EKO®plus with pneumatic actuator. Resilient-seated gate valve with bolted cover connection and face-to-face length of Basic Series 15 for water applications. Proven design with innovative improvements, such as plastic sliding caps on the wedge, guarantee low operating torques even after many years of use. Suitable for water-treatment applications, water distribution, in storm water retention basins and sand catchers, in dams, power plants, industry and in pressure management.

PN: 10 - DN: 40...300

Downloads
Technical datasheet
Operating and maintenace instructions
Drawings BETA®300 EKO®plus_DGW
Drawings BETA®300 EKO®plus_DXF

ENERGI & KRAFT VAG VAND & SPILEVAND

Any questions?

Frank Kirk Hansen
Area Account Manager West
Phone. 4053 6511

Frank.Kirk@askalon.dk

Kenn Gerwien
Area Account Manager East
Phone. 2346 5513

Kenn.Gerwien@askalon.dk

Characteristics
Material
Anticorrosive
Product request

Sealing system/standard: Resilient seated in accordance with EN 1074 (DIN 3352 - 4B)
Face-to-face length: acc. to EN 558, basic series 15 (DIN 3202, F5)
With flange ends on both sides acc. to EN 1092-2
Low operating torque due to plastic sliding guides on the wedge
With pneumatic actuator
Maintenance-free and corrosion-resistant stem sealing
With triple O-ring sealing
Suitable for vacuum of up to 90%

Bonnet: Ductile iron EN-GJS-400-15 (GGG-40)
Body: Ductile iron EN-GJS-400-15 (GGG-40)
Wedge: Ductile iron EN-GJS-400-15 (GGG-40) encapsuled with EPDM vulcanized (water/sea water), for Wastewater encapsuled with NBR vulcanized
Bonnet bolts: Stainless steel A2 (DIN EN ISO 3506)
Stem: Stainless steel 1.4057*
Stem nut: Brass (water)

Internally and externally epoxy coated acc. to GSK guidelines

Brands

VAG EKO plus with pneumatic actuator

Questions about the product?