Home/Produkter/VAG RIKO Plunger Valve one-piece body, with electric actuator - water

VAG RIKO Plunger Valve one-piece body, with electric actuator - water

VAG RIKO® Plunger Valve one-piece body, with electric actuator. Externally controlled control valve with annular flow cross-section for the continuous regulation of high pressure differences and flow rates. Long service life as the bearings do not come into contact with the medium. Wear-resistant, corrosion- and infiltration-proof guide rails due to hard-facing. This ensures low operating forces and prevents jamming of the piston. Suitable for use in water treatment, water distribution, in dams, power plants, industry and in pressure management.

PN: 10/16/25/40 - DN: 150...2200

Downloads
Technical datasheet
Operating and maintenance instructions
Drawings RIKO®EA_DN150-700_DXF
Drawings RIKO®EA_DN800-2000_DXF

ENERGI & KRAFT VAG VAND & SPILEVAND

Any questions?

Frank Kirk Hansen
Area Account Manager West
Phone. 4053 6511

Frank.Kirk@askalon.dk

Kenn Gerwien
Area Account Manager East
Phone. 2346 5513

Kenn.Gerwien@askalon.dk

Characteristics
Material
Anticorrosive
Product request

Face-to-face length: acc. to EN 558, basic series 15 - from DN 500 1.5 x DN
With flange ends on both sides acc. to EN 1092-2
Control valve in straightway type
With customized control device depending on operating conditions
Low actuating torque due to pressure balanced valve piston
Rotationally symmetrical flow guidance
Annular flow cross section in each position
Axial movement of the plunger by means of crank gear mechanism
With self-locking worm gear unit including position indicator
With electric actuator
Elastic profile sealing ring located in the no-flow zone for high durability
Wear-resistant, corrosion-resistant and infiltration-proof piston guides in the body by micro-finished bronze weld overlay

Inner parts: Stainless steel (exception: > DN 600 crank gear from EN-GJS-400-15 (GGG-40))
Valve sealing: EPDM
Piston: Stainless steel 1.4301
Body: Ductile iron EN-GJS-400-15 (GGG-40)
Bearing bush: Bronze
Eye bolts for lifting: Galvanized steel 1.0401 (C15)

Internally and externally epoxy coated

Brands

VAG RIKO Plunger Valve one-piece body, with electric actuator - water

Questions about the product?