Home/Products/Fisher 3582 Pneumatic Single-Acting Positioner

Fisher 3582 Pneumatic Single-Acting Positioner

Any questions?

Erik Rune
Solution Seller
Phone. +46 54-57 92 31

Erik.Rune@askalon.se

Kenneth Olsson
Account Manager
Phone. +46 54-57 92 04

Kenneth.Olsson@askalon.se

Martin Pettersson
Solution Seller
Phone. +46 54-57 92 40

Martin.Pettersson@askalon.se

Rickard Andersson
Account Manager
Phone. +46 40-33 02 34

Rickard.Andersson@askalon.se

Morten Noppenau
Country Manager Askalon Denmark
Phone. +45 2121 3491

Morten.Noppenau@askalon.dk

Peder Hvidberg
Account Manager
Phone. +45 2178 5053

Peder.Hvidberg@askalon.dk

Taneli Luhanko
Inside Sales Engineer
Phone. +358 207 416 202
Mob. +358 40 757 4208

Taneli.Luhanko@askalon.fi

Fisher 3582™ pneumatic valve positioners are used with diaphragm-actuated, sliding-stem control valve assemblies. This pneumatic valve positioner receives a pneumatic input signal from a control device and modulates the supply pressure to the control valve actuator, providing an accurate valve stem position that is proportional to the pneumatic input signal.

Fisher REFINERY

Specifications
Features

Area Classification	ATEX Group II Category 2 Gas and Dust, CUTR for Groups II/III Category 2 Equipment
Certifications	ATEX, CUTR, PED
Communication Protocol	3-15 or 6-30 psi, 0.2 -1.0 or 0.4 -2.0 bar Pneumatic Signal
Diagnostics	No
Input Signal	Pneumatic
Max Outlet Pressure	50 psi
Mounting Type	Actuator Mounted
Operating Temperature	Standard Temperature, High Temperature
Position Control	Modulating
Safety Certification	NIL
Supply Media	Air, Natural Gas

The range of the adjustable zero and span permits the use of all standard input signals, including split ranges.
Because units from one positioner family can be used in a variety of control applications, basic spare parts inventory requirements are simplified and fewer spare parts are needed to support a plant-wide positioner applications base.
With the cover removed, zero and span adjustments are easily accessible and can be made with a screw driver and spanner.
Changes in supply pressure and valve load have minimal effect on positioner operation.
Case, components, and gasket materials are able to withstand harsh environments. Positioner bleed air purges internal parts for additional protection..
Simple adjustments permit switching between direct and reverse action.
To support diagnostic testing of valve/actuator/positioner packages with the FlowScanner™ valve diagnostic system, connectors, piping, and other hardware can be installed between the positioner and the actuator.

Brands

Fisher 3582 Pneumatic Single-Acting Positioner

Questions about the product?