Rotork RC200 Compact Pneumatic Actuator

Rotork RC200 Compact Pneumatic Actuator

The RC200 is an extremely compact pneumatic actuator. Its scotch yoke design is particularly suited for valves with high start or end torque requirements. It is available in double-acting and spring-return configurations with torque output up to 4,400 Nm (38,000

It is available in both double-acting and spring-return configurations with an optional integral manual override.

RC200 actuators are manufactured under strict quality control in an ISO 9001 / 14000 environment. They comply with all standard international requirements and are CE marked according to PED and ATEX.


Any questions?

Fredrik Ekeroth
Solution Seller
Phone. +46 54-57 92 06

Joakim Karlsson
Solution Seller
Phone. +46 54-57 92 16

Operating Pressure: 2-10 bar (30-145 psi)
Torque Output Up to 4,400 Nm (39,000 lbf-in)
Temperature Ranges (Actuators Remain Air Tight):
Standard -20 to +80 ºC (-4 to +175 ºF)
High 0 to +150 ºC (+32 to +300 ºF)
Low -40 to +60 ºC (-40 to +140 ºF)
Arctic -47 to +60 ºC (-52 to +140 ºF)
Solenoid valve connection NAMUR
Fitting accessories VDI/VDE 3845, NAMUR
Fitting to valve Hole pattern, centering ring, ISO 5211, DIN 3337, NAMUR
Stardrive shaft ISO 5211 with 90º and DIN 79 with 45º and NAMUR
  • Compact design in double-acting or spring-return
  • Contained spring module for safety and convenience
  • Valve mounting dimensions per ISO 5211/DIN 3337
  • Pre-tensioned springs for safety
  • Connections according to international standards
  • Scotch yoke design provides high torque in the end positions
  • Three-year warranty
  • High efficiency, low air consumption
  • Housing in anodised aluminium
  • Standard temperature range -20°C to +80°C (-4°F to +175°F)
  • Actuators certified in accordance with PED 2014/68/EU
  • Actuators certified to ATEX 2014/34/EU
  • Certified suitable for use at SIL3 as a single device (IEC 61508)

Questions about the product?

Fill out the form below and we will contact you with answers to your questions