VAG ERI plus Penstock Shut-off and control valve - four side sealing - wastewater

VAG ERI plus Penstock Shut-off and control valve - four side sealing - wastewater

Shut-off and control penstock with a compact design (closed frame design); four-side sealing, made of stainless steel, for wall mounting. Especially sturdy design with separate sliding and sealing system. Square opening, leak-tightness: max. 5% according to DIN 19569, non-rising stem. Suitable for use in wastewater applications, water treatment plants, in stormwater retention basins and in flood protection.

W: 150...1000 - H: 150...1000

Downloads
Technical datasheet
Operating and maintenance instructions
Drawings ERI®plus DN150...DN600_DWG
Drawings ERI®plus_DN150-DN1000_DWG

Any questions?

Fredrik Ekeroth
Solution Seller
Phone. +46 54-57 92 06

Fredrik.Ekeroth@askalon.se

Fredrik Malmström
Solution Seller
Phone. +46 40-33 02 33

Fredrik.Malmstrom@askalon.se

Johan Mattsson
Account Manager Infrastructure
Phone. +46 54-57 92 52

Johan.Mattsson@askalon.se

Frank Kirk Hansen
Area Account Manager West
Phone. +45 4053 6511

Frank.Kirk@askalon.dk

Kenn Gerwien
Area Account Manager East
Phone. +45 2346 5513

Kenn.Gerwien@askalon.dk

  • Compact valve with self-contained frame design for wall mounting with anchors
  • Vibration-free guiding of the gate over the entire travel; can be used in intermediate positions as control valve
  • Sliding system between gate and frame
  • Sturdy welded structure; components dip pickled and passivated
  • Rotatable stem nut
  • Integrated and chambered profiled seal
  • Seal between valve and wall mounted to the valve and ready for operation
  • Non-rising stem
  • Sealing system/standard:
    • Four side sealing
    • Tightness: max. 1% (on seating pressure) and max. 5% (off seating pressure) of leakage rate acc. to DIN 19569 Part 4 in installed state
  • Square opening for wall mounting with anchors
  • All stainless steel parts: Dip pickled and passivated
  • Stem nut: Zinc-free bronze (wastewater resistant)
  • Frame: Stainless steel A2
  • Sealing system: Wastewater resistant and UV-resistant EPDM
  • Knife: Stainless steel A2
  • Stem: Stainless steel 1.4057

Questions about the product?

Fill out the form below and we will contact you with answers to your questions