AMM731 Butterfly Damper Valve

AMM731 Butterfly Damper Valve

AMM731 Butterfly Damper Valve is for on/off or modulating service. Maximum working temperature is up to 600°C. Maximum working pressure is up to 3 bar. AMM731 has a diameter range from DN 150 to DN 1500 (DN below 150 or above 1500 upon request).

End connections: wafer or flanged PN6, PN10, ANSI 150, butt weld or according to customer drawing. Outside bushing. Tightness class I, II and III according to FCI 70-2 (ex ANSI B16.104). Max leakage class III (FCI 70-2). It is operated by handlever, pneumatic or electric actuators. Material: Carbon steel, corten, AISI 304, AISI316.

AMM731 Butterfly Damper Valve is suitable for many different applications:
- Fluids: air, gas and fumes
- CHP and Incineration Plants
- Biomass and Biogas and Renewable Energy Plants
- Steel Industry and Furnaces
- Glass Industry
- Cement Plants
- Air Pollution and Filtration
- Power Plants
- Heat recovery systems
- Boilers and Burners
- Chemical Industry
- Oil and Gas
- HVAC
- Thermal Oxidizers

Any questions?

Fredrik Ekeroth
Solution Seller
Phone. +46 54-57 92 06

Fredrik.Ekeroth@askalon.se

Kristoffer Rådström
Solution Seller
Phone. +46 54-57 92 59

Kristoffer.Radstrom@askalon.se

Anders Praem
Inside Sales Engineer
Phone. +45 2137 7759

Anders.Praem@askalon.dk

Tommi Penttilä
Sales Manager Conventional Power
Phone. +358 207 416 208
Mob. +358 40 512 2308

Tommi.Penttila@askalon.fi

Materials Carbon Steel: S355JOWP, Corten A (Tmax < 450°C) ,304 SS, 316 SS, others upon request
Applicable Standards Designed according to EN 12516-1, EN 736-1, EN 736-2 , EN 736-3 , EN 1349 , EN 593 , ASME B16.34
Materials according to EN 1503-1, EN 1503-2
End Connections as per EN 1092-1, ASME B16.5
Marking according to EN 19
Certified Welding Procedures according to UNI EN 287-1
Applicable Directives Declaration of Conformity in Compliance with Machinery Directive 2006/42/CE
Declaration of Conformity in Compliance with Directive PED 97/23/CE
Declaration of Conformity in Compliance with Directive ATEX 94/9/CE
Group II Category 3 for Zone 2 Gas and 22 Dust
Coating According to PSP00 Cycle PS4-PHT
Carbon Steel: RAL 9005 HT sylicon coating
Test According to AMMtech Quality Control Plan QCP00
According to ANSI/FCI70-2-2006, EN 12266-1, EN 12266-2, EN 60534
Driving Systems Pneumatic and Electric Actuators according to EN 15714-1, EN 15714-2, EN 15714-3
Actuators End Connections as per EN ISO 5210, EN ISO 5211

Questions about the product?

Fill out the form below and we will contact you with answers to your questions