Fisher Type 92W Pressure Reducing Liquid Regulators

Fisher Type 92W Pressure Reducing Liquid Regulators

Fisher™ type 92W pressure-reducing regulator for liquid service includes either a Type 6492H or a Type 6492L pilot. This reliable, dependable regulator uses time-proven design concepts. Pilot supply pressure is piped from the main valve inlet to the pilot inlet connection. Downstream pressure registers on the main valve pistons through the downstream control line and then on the pilot diaphragm. 

Any questions?

Fredrik Andrée
Inside Sales Engineer
Phone. +46 54-57 92 41

Fredrik.Andree@askalon.se

Joachim Nyqvist
Inside Sales Engineer
Phone. +46 54-57 92 17

Joachim.Nyqvist@askalon.se

Frank Kirk Hansen
Area Account Manager West
Phone. +45 4053 6511

Frank.Kirk@askalon.dk

Slawka Pedersen
Inside Sales Manager
Phone. +45 2137 7702

Slawka.Pedersen@askalon.dk

Joonas Jägerroos
Inside Sales Engineer
Mob. +358 40 610 4439

Joonas.Jagerroos@askalon.fi

Maximum Temperature Cast Iron Body: 406°F / 208°C | Steel Body: 500°F / 260°C
Body Sizes NPS 1 / 1.5 / 2 / 2.5 / 3 / 4 | DN 25 / 40 / 50 / 65 / 80 / 100
End Connections NPT / CL125FF / CL150RF / CL250RF / CL300RF / CL600RF
Maximum Inlet Pressure Cast Iron: 250 PSIG / 17.2 bar | Steel: 300 PSIG / 20.7 bar | Or body rating limit, whicever is lower
Maximum Outlet Pressure 250 PSIG / 17.2 bar
Spring Ranges 2 to 250 PSIG / 0.138 to 17.2 bar
  • Noise Reduction Capability without Decrease in Capacity
  • Good Shutoff for Low Downstream Buildup 
  • Ease of Installation

Questions about the product?

Fill out the form below and we will contact you with answers to your questions