Home/Products/Sempell Model AVS 4/5 HP Preheater Protection Valves

Sempell Model AVS 4/5 HP Preheater Protection Valves

Any questions?

Bernhard Witzelsteiner
Account Manager
Mob. +46 70 378 83 35

Fredrik Malmström
Solution Seller
Phone. +46 40-33 02 33

Anders Praem
Inside Sales Engineer
Phone. +45 2137 7759

Frank Kirk Hansen
Account Manager
Phone. +45 4053 6511

Slawka Pedersen
Inside Sales Manager
Phone. +45 2137 7702

Henna Ketoja
Inside Sales Engineer
Mob. +358 400 612 124

Tommi Penttilä
Sales Manager Conventional Power
Phone. +358 207 416 208
Mob. +358 40 512 2308

Sempell™ model AVS 4/5 HP is a typical feed water heater isolation system.

NUCLEAR POWER Sempell

Certifications	ASME B31.1, PED
End Connection	Butt Weld
Material	Carbon Steel
Operating Temperature	High Temperature
Pressure Class	ASME, PN
Process Connection Type	Threaded, Flanged, Socket Weld, RTJ
Shutoff Class	Class V (FCI 70-2)
Valve Size	NPS 6 / DN 150, NPS 4 / DN 100, NPS 3 / DN 80, 6 inch (DN150) and Larger
Valve Size Standard	NPS, DN
Valve Type	Three-Way Valve, Globe, Engineered Product

Body of forged steel
Body in form piece to reduce a number of welds and fittings
Body also available as a single block type – thereby eliminating the nozzle welding seams
Fast switch over, in order to avoid damaging further HP feedwater pipes
Alternatives with a moderation of the closing speed by means of various solutions. This is then required if it is possible for the water to hit and damage the separation wall of the preheater or if the customer specifies the operating times
Simultaneous operation of two main valves with one pilot valve
Open the preheater only after equalization of the pressure – increases safety because work is done behind the valve
System medium operated - no heavy actuator
Alternatives available for selection of the pilot valves