Südmo SVP Select Single Seat Valve

Südmo SVP Select Single Seat Valve

The Pentair Südmo SVP Select single seat valve series meets the highest requirements for quality, cleaning capability and easy maintenance. The modular design ensures that the right valve can be made for any process application in the beverage, food, pharmaceutical, and cosmetics industries.

Particularly in areas where aseptic valves are required, by using the P³ diaphragm we offer the best performance in regard to chemical and temperature resistance, and pressure stability. All materials are FDA and 3-A compliant and have passed the EHEDG cleaning test. Because components are machined, higher grade alloys can also be used for the wetted components. The stems are offered with O-Rings for superior sealing or PEEK for aggressive media conditions with our standard actuator.

The modular design allows for common seal dimensions and actuators for the various sizes. Because no special tools are required, maintenance of the valve is quick and easy. With the addition of Pentair Südmo’s IntelliTop™ 2.0, the valves can be operated and monitored through the control system.

Any questions?

Fredrik Malmström
Solution Seller
Phone. +46 40-33 02 33

Fredrik.Malmstrom@askalon.se

Anders Praem
Inside Sales Engineer
Phone. +45 2137 7759

Anders.Praem@askalon.dk

Slawka Pedersen
Inside Sales Manager
Phone. +45 2137 7702

Slawka.Pedersen@askalon.dk

Tommi Penttilä
Sales Manager Conventional Power
Phone. +358 207 416 208
Mob. +358 40 512 2308

Tommi.Penttila@askalon.fi

Material: Product contact 1.4404 (AISI 316L)
Material: Non-product contact 1.4301 (AISI 304) / 1.4307 (AISI 304L)
Seals: Standard EPDM
Seals: Optional HNBR, FKM, PEEK
Seals: Diaphragm
Approvals / Certificates EHEDG, 3A Standard 53-06, FDA, CRN, EAC
Operating temperatures EPDM seals 130 °C (266 °F) continuous
150 °C (300 °F) short sterilization
Control air pressure Standard 6 bar (87 psi) – 8 bar (116 psi)
With pneumatic power amplifier: 3.5 bar (51 psi)
Operating pressure - DN 10-20 / OD 0.5-0.75: 10 bar (145 psi)
- DN 25-100 / OD 1.0-4.0: 6 bar (87 psi)
- DN 125-150 / OD 6.0: 5 bar (73 psi)
Finish: Product contact Ra ≤ 0.8 μm
Finish: Non-product contact Ra ≤ 1.6 μm
Finish: Optional Higher surface quality; e-polish
Tube dimensions to - DIN 11850 Series 2 (DIN 11866 Series A)
- ASTM A270 (ASME BPE-2014 / DIN 11866 Series C)
  • General advantages
    - Body machined from a solid piece of bar stock
    - Modular system suitable for all applications
    - Good cleaning properties
    - Long service life
    - Field reversible actuator

  • Advantages of P³ diaphragm
    - High number of switching cycles
    - Good Cvs-Values
    - Pressure - stable under continuous pressure up to 10 bar (145 psi)
    - Highly resistant to aggressive chemicals
    - Resistant to temperatures up to 150 ºC (320 ºF)

  • Advantages of PEEK seat
    - Prevents product burning on the valve seat
    - No additional sealing element on the valve seat
    - Very good chemical resistance
    - High temperature resistance

Questions about the product?

Fill out the form below and we will contact you with answers to your questions