VAG EKO plus prepared for electric actuator resilient seated - long face-to-face length - water, wastewater, sea water

VAG EKO plus prepared for electric actuator resilient seated - long face-to-face length - water, wastewater, sea water

VAG EKO®plus Gate Valve prepared for electric actuator resilient seated - long face-to-face length. Resilient-seated gate valve with bolted cover connection and face-to-face length of Basic Series 15 for water applications. Proven design with innovative improvements, such as plastic sliding caps on the wedge, guarantee low operating torques even after many years of use. Suitable for water-treatment applications, water distribution, in storm water retention basins and sand catchers, in dams, power plants, industry and in pressure management.

PN: 10/16 - DN: 40...600

Downloads
Technical datasheet
Operating and maintenance instructions
Drawings BETA®300 EKO®plus_DGW
Drawings BETA®300 EKO®plus_DXF 

Any questions?

Fredrik Andrée
Inside Sales Engineer
Phone. +46 54-57 92 41

Fredrik.Andree@askalon.se

Fredrik Ekeroth
Inside Sales Engineer
Phone. +46 54-57 92 06

Fredrik.Ekeroth@askalon.se

Fredrik Malmström
Inside Sales Engineer
Phone. +46 40-33 02 33

Fredrik.Malmstrom@askalon.se

Frank Kirk Hansen
Area Account Manager
Phone. +45 4053 6511

Frank.Kirk@askalon.dk

Kenn Gerwien
Area Account Manager
Phone. +45 2346 5513

Kenn.Gerwien@askalon.dk

  • Low operating torque due to plastic sliding guides on the wedge
  • With flange ends on both sides acc. to EN 1092-2
  • Prepared for electric actuator
  • Maintenance-free and corrosion-resistant stem sealing
  • With triple O-ring sealing
  • Low wear due to wedge guiding and elongated stem bearing
  • Suitable for vacuum of up to 90%
  • Face-to-face length: acc. to EN 558, basic series 15 (DIN 3202, F5)
  • Sealing system/standard: Resilient seated in accordance with EN 1074 (DIN 3352 - 4B)
  • Bonnet: Ductile iron EN-GJS-400-15 (GGG-40)
  • Body: Ductile iron EN-GJS-400-15 (GGG-40)
  • Wedge: Ductile iron EN-GJS-400-15 (GGG-40) encapsuled with EPDM vulcanized (water/sea water), for Wastewater encapsuled with NBR vulcanized
  • Bonnet bolts: Stainless steel A2 (DIN EN ISO 3506)
  • Stem: Stainless steel 1.4057*
  • Stem nut: Brass (water)

Internally and externally epoxy coated acc. to GSK guidelines

Questions about the product?

Fill out the form below and we vill contact you with answers to your qusestions