Fisher 3582i Elektropneumatisk lägesställare

Fisher 3582i Elektropneumatisk lägesställare

Fisher™ 3582i-serien, elektropneumatisk lägesställare för linjär rörelse, används för både direkt och reverserande funktion. Den är exakt, svarar snabbt och kan klara vibrationerna i de flesta fabriksmiljöer. Låg stadig luftförbrukning bidrar till effektiv drift.

Har du några frågor?

Erik Rune
Solution Seller
Tel. 054-57 92 31

Erik.Rune@askalon.se

Jörgen Sundin
Solution Seller
Tel. 054-57 92 12

Jorgen.Sundin@askalon.se

Kenneth Olsson
Account Manager
Tel. 054-57 92 04

Kenneth.Olsson@askalon.se

Martin Pettersson
Solution Seller (parental leave)
Tel. 054-57 92 40

Martin.Pettersson@askalon.se

Niklas Pettersson
Account Manager
Tel. 054-57 92 09

Niklas.Pettersson@askalon.se

Area Classification Explosion Proof, Intrinsically Safe, Non-incendive, Dust
Certifications CSA, FM, ATEX, IECEx, CUTR, Peso, KGS, INMETRO, NEPSI, RCM
Communication Protocol 4-20mA Analog
Data Interface Wired
Diagnostics No
Input Signal Electric
Mounting Type Actuator Mounted
Operating Temperature Standard Temperature, High Temperature
Position Control Modulating
Process Control Flow, Pressure, Temperature, Level
Safety Certification NIL
Supply Media Air
  • The range of the adjustable zero and span permits the use of all standard input signals including split ranges.
  • Because units from one positioner family can be used in a variety of control applications, basic spare parts inventory requirements are simplified and fewer spare parts are needed to support a plant-wide positioner applications base.
  • With the cover removed, zero and span adjustments are easily accessible and can be made with a screw driver and spanner.
  • Changes in supply pressure and valve load have minimal effect on positioner operation.
  • Case, components, and gasket materials withstand harsh environments. Positioner bleed air purges internal parts for additional protection.
  • Simple adjustments permit switching between direct and reverse action.
  • To support diagnostic testing of valve/actuator/positioner packages with the FlowScanner™ valve diagnostic system, connectors, piping, and other hardware can be installed between the positioner and the actuator.

Frågor på produkten?

Fyll i formuläret nedan så kontaktar vi dig och svarar på dina frågor