Hem/Produkter/Fisher SS-263 Volymbooster

Fisher SS-263 Volymbooster

Har du några frågor?

Jörgen Sundin
Solution Seller
Tel. 054-57 92 12

Jorgen.Sundin@askalon.se

Martin Bengtsson
Solution Seller
Tel. 054-57 92 50

Martin.Bengtsson@askalon.se

Fisher™ SS-263 volymbooster används endast i paket med Fisher Optimized Digital Valve (ODV). Den förstärker utsignalen från FIELDVUE™ lägesregulator för att öka sträckhastigheten hos pneumatiska ställdon. Den kan leverera högvolymutgång för snabba hastigheter vid svar på stora ingångssignaländringar eller jämn, stabil, låg volymutgång vid svar på små inmatningssignaländringar. Detta möjliggör stabil, exakt gasreglering som ofta är nödvändig vid start eller igångkörning av processkontrollutrustning.

Fisher KRYOGEN & LNG

Specifikationer
Funktioner

Port Diameters	Supply port: 19 mm (0.75 inch) Exhaust Port: 19 mm (0.75 inch)
Input Signal	Positioner output
Maximum Input Signal Pressure	10.3 bar (150 psig)
Input to Output Pressure Ratio	Fixed at 1 to 1
Supply Pressure Ranges	Maximum pressure must not exceed 10.3 bar (150 psig)
Operating Temperature	-40 to 71 C (-40 to 160 F)
Maximum Flow Coefficients	Supply: 9.5 Cv Exhaust 9.5 Cv C1: 35 Xt: 0.77
Connections	Input signal: 1/4 NPT Supply: 1 NPT Output: 1 or 1-1/4 NPT
Hazardous Area Classification	Complies with the requirements of ATEX Group II Category 2 Gas and Dust
Declaration of SEP	Fisher Controls International LLC declares this product to be in compliance with Article 3 paragraph 3 of the Pressure Equipment Directive (PED) 97 / 23 /EC. It was designed and manufactured in accordance with Sound Engineering Practice (SEP)
Approximate Weight	Aluminum: 3.6 kg (8 lbs) Stainless Steel: 10.8 kg (24 lbs)

Fast Response: The SS-263 delivers high-volume output for fast stroking speeds when responding to large input signal changes and low-volume output when responding to small input changes.
High capacity: Flow capacities of roughly three times higher than the 2625 booster result in the need for fewer fittings, tubing, and units.
Noise Attenuation: Exhaust is passed through specially-designed passages to reduce the amountof ambient noise that is generated.
Adjustable Response: The integral bypass restriction allows the booster to be easily and readily tuned to operate under small or large input signal changes.
Auxiliary Supply Connections: Supply air is readily available through two 1/4 NPT connections that are built into both sides of the unit for use with a Fisher 377 trip valve or other accessory.
3 in 1 Connection: This special connection can provide any of the following connections, if needed: 1/4 NPT diagnostic connection for easy testing, 1/4 NPT actuator bypass assembly connection foruse on an actuator with a handwheel, and 3/4 NPT connection
Soft-Seated Construction: Soft seated exhaust and supply valves provide for bubble tight shutoff toreduce unnecessary air consumption and ensure fail mode upon loss of plant air.
Robust Mounting: Flanged-style actuator mounting provides ease of maintenance, simplifiedtubing, compactness, and high vibration resistance.

Varumärken

Fisher SS-263 Volymbooster

Frågor på produkten?