Fisher FIELDVUE DPC2K Digital processkontroller

Fisher FIELDVUE DPC2K Digital processkontroller

Har du några frågor?

Joachim Nyqvist
Solution Seller
Tel. 054-57 92 17

Joachim.Nyqvist@askalon.se

Joakim Karlsson
Solution Seller & Product Manager
Tel. 054-57 92 16

Joakim.Karlsson@askalon.se

Martin Pettersson
Solution Seller
Tel. 054-57 92 40

Martin.Pettersson@askalon.se

Frågor på produkten?

Fyll i formuläret nedan så kontaktar vi dig och svarar på dina frågor






Fisher™ FIELDVUE™ DPC2K digital processkontroller är en elektropneumatisk PID-kontroller som kan ersätta pneumatiska kontroller för att möta dina kontinuerliga PID-loopbehov. DPC2K har designats för att ge applikationsflexibilitet, genom enkel konfiguration och höghastighetsnätverkskommunikation, för ditt nästa expansions- eller moderniseringsprojekt.

Instrument Power 9 to 28 VDC at 1 Watt nominal
Certifications CSA & cSAus: Type 4X, IP66
ATEX & IECEx: IP66
Communication Protocol Ethernet: Modbus TCP, HART-IP (Common commands and Universal commands)
Serial: Modbus RTU
Baud: Configured 9600 to 256,000 baud Default 115,200
Analog Inputs (2) 4-20 mA
Analog Output (1) 4-20 mA
Pressure Sensor Option: Sealed Gauge 2.1, 6.9, 20.7, 41.4, 103 bar (30, 100, 300, 600, 1500 psi) ranges available
Pneumatic Output Single-Acting Direct
Low Bleed Steady State Air Consumption At 1.4 bar (20 psig) supply pressure 0.056 normal m3/hr (2.1 scfh), average
At 5.5 bar (80 psig) supply pressure 0.184 normal m3/hr (6.9 scfh), average
Supply Pressure Minimum Recommended: 0.3 bar (5 psig) higher than maximum actuator requirements
Maximum: 10.0 bar (145 psig) or maximum pressure rating of the actuator, whichever is lower
Medium: Air or Natural Gas
Supply medium must be clean, dry and noncorrosive
Connections Supply Pressure: 1/4 inch NPT internal
Output Pressure: 1/4 inch NPT internal
Tubing: 3/8 inch recommended
Vent: 3/8 inch NPT internal
Electrical: 1/2 inch NPT internal, two conduit entries
  • Put simple control at the valve
  • Save money and time with integrated packaging, quick configuration, and application flexibility
  • Install field intelligence to enhance safety, responsiveness, and productivity
  • Provide process data previously not available with game changing Ethernet connectivity
  • Transform operations by upgrading technology from pneumatics to electro-pneumatic
  • Address regulatory and climate issues by leveraging low bleed technologies and adding control to electric actuation