Sempell Kilslidsventil för höga tryck

Sempell Kilslidsventil för höga tryck

Sempell™ smidd kilslidsventil för höga tryck och temperaturer. Som standard med elastisk delad kil. Parallellslid på förfrågan. Trycktätat lock. Stelliterat säte i hus samt på kilen. För handmanöver, motor- eller pneumatiskt don. DN50-750, PN160-720.

Har du några frågor?

Fredrik Malmström
Solution Seller
Tel. 040-33 02 33

Linda Grönqvist
Solution Seller
Tel. 040-33 02 32

Certifications CE, ASME B31.1, India Boiler Registration, PED
End Connection Butt Weld
Application Steam turbine, Steam Headers, HRSG, Pumps, Valves & Manifolds, High Temp, General Service, Balance of Plant
Body Design Short Pattern, Long Pattern
Material Alloy, Carbon Steel, Stainless Steel, Steel, Metal
Operating Temperature High Temperature
Pressure Class ASME, PN
Process Connection Type BWE
Seat/Seal Type Metal-to-Metal, Parallel Slide, Wedge
Shutoff Class Class V (FCI 70-2)
Standards ASME B16.34
Valve Size 5 inch, 6 inch (DN150) and Larger, NPS 2 / DN 50, NPS 3 / DN 80, NPS 4 / DN 100, NPS 2-1/2 / DN 65, NPS 6 / DN 150
Valve Size Standard DN, NPS
Valve Type Gate
Media Hot Water, Steam, Water
  • High quality forged materials to guarantee a superior performance and to sensibly decrease operating costs and delivery times.
  • Valve design in accordance with ASME B16.34, API 600, ISO, DIN, TRD, VGB, TRB, PED standards.
  • Applicable for high pressure ratings (PN 720) and for temperature up to 650°C.
  • In full compliance with the Health, Safety and Environment requirements to avoid any risk of fugitive emissions.
  • Conforms with the European Pressure Equipment Directive n°2014/68/EU (CE mark 100% compliance).
  • Extraordinary tightness obtained by a specific gasket design and packing in pure graphite.
  • Technologically advanced pressure seal bonnet design is offered as standard to ensure a perfect body-bonnet tightness and to facilitate any maintenance operation.
  • Standard configuration: flexible split wedge. The wedge guide is welding-free as integral to the valve body.
  • Parallel slide configuration available upon request.
  • Special constructions and materials available to suit customers’ request.
  • Stellite Gr.6 overlay on seats and wedge or disc; 13% Chrome on backseat.
  • Valves are offered as standard with manual operators (Hand wheel or bevel gear depending on size). Actuated options such as electric, pneumatic or hydraulic are available.

Frågor på produkten?

Fyll i formuläret nedan så kontaktar vi dig och svarar på dina frågor