Hem/Produkter/AEV Roterande ²XC dubbelexcentrisk C-kulventil

AEV Roterande ²XC dubbelexcentrisk C-kulventil

Har du några frågor?

Joakim Karlsson
Solution Seller & Product Manager
Tel. 054-57 92 16

Joakim.Karlsson@askalon.se

AE Valves roterande ²XC dubbelexcentrisk C-kulventil är en friktionsfri ventil skapad för de tuffaste applikationerna. När ventilen är stängd uppnås absolut nolläckage. Med sin banbrytande C-formade kuldesign levererar ²XC™-kulventilen oöverträffad momenttäthet i avstängt läge, med förbättrad säkerhet, tillförlitlighet och prestanda.

AEV CARBON CAPTURE EMETHANOL GRÖN AMMONIAK KRYOGEN & LNG POWER-TO-X RAFFINADERI VÄTGAS

Specifikationer
Funktioner
Relaterade produkter

Certifications	API 6D, Shell DVT, SIL 3 Capable, Firesafe and Fugitive Emissions
Critical Service	Severe Service, Molecular Sieve, Polymers
Material	Chrome Carbide, Tungsten Carbide or other hard facing, Ceramic Inserts
Operating Temperature	Up to 1500°F (816°C)
Pressure Class	ASME, EN PN
Connection Type	Flanged, Butt Welded, Socket Welded, Threaded, Hub
Shutoff Class	ASME Class 150, 300, 600, 900, 1500, 2500, 4500 PN 10 – 760
Size	NPS ½ – 42 (DN 15 – 1050)

TROUBLE-FREE OPERATION – Enjoy smooth operation over an extended high cycling life with the cavity free design that eliminates the opportunity for product to build up in the cavity, harden and impair operation of the valve. The ²XC is also completely safe for volatile fluids that can expand, decompose or ignite in trapped cavities.
OPTIMZED SEALING – Rely on the ²XC’s fixed seat to provide repeatable, ultra tight shutoff with a design that eliminates the use of springs and yet another opportunity for product build up that can result in fouling, seat contamination, and premature valve failure.
MINIMIZE PARTICLE DAMAGE – Achieve longer lasting tight shutoff in severe service applications with a cam motion that creates low friction and thereby minimizes particle damage. In contrast, traditional ball valves with a concentric motion are highly susceptible to sealing service wear.
PARTICLE SWEEPING – Minimize stress on valve closure with a convex to convex seat design that sweeps particles in the last 2-3 degrees of motion rather than compressing impurities into the valve trim to maintain seal integrity.
INPENETRABLE PROTECTION – Take on abrasive particle applications with a valve architecture that allows 100% unbroken HVOF coating of the ball surface. With no start or end point, the hard wearing coating is extremely resistant to wear and is able to close on particles without damage.